RWB Jabsco Par-Max HD6 Fresh Water Press Pump - 12v, 40psi, 22.7lpm

Jabsco Par Max 6 HD 12v Fresh Water Press Pump 40psi 22.7lpm
J20-282 Jabsco P601J-215S-3A

These Heavy Duty (HD) Par-Max 6 freshwater pressure pumps off er robust construction and extra high performance. These new modern design pumps have a 5 chamber diaphragm with reinforced polypropylene pumphead and offer pressure up to 60PSI. These heavy Duty (HD) models include a heavy duty wider diameter motor with a powder coated shell, cast aluminium end bells and lower housing - to improve pressure capability and off er longer life and exceptional performance.

The ideal robust heavy duty pump for providing freshwater automatically to up to 5 x 20mm outlets on pleasure craft up to approx the 18 metre (60 Ft) range. Includes a 40 mesh plug-in large port inlet strainer in the box with the pump. This HD 5 chamber automatic pressure pump gives flow up to 6 US Gallons per minute (22.7 litres per minute) and pressure up to 60 PSI. Serves up to 5 x 20mm outlets onboard including galley, shower and additional faucets.

The Par-Max 6.0 HD gives very smooth water flow even at low demand due to its built-in pulsation dampening by-pass valve which controls unwanted cycling and reduces noise. Inlet fi lter, corrosion resistant motor, soft rubber vibration dampening mounts and quick connect plug-in hose ports included - 2 x 20mm barbed for hose. Uses LARGE size Jabsco plug-in ports. 12 volt or 24 volt - in 40PSI or 60 PSI cut-out pressure versions.

Features and Benefits

• Fully automatic operation with integrated sealed pressure switch
• Pressure switch 40PSI or 60PSI cut off
• High capacity fl ow up to 22.7 litres 6 US gallons per minute
• Serves up to 5 x 20mm outlets on board simultaneously
• Modern 5 chamber design gives ultra smooth fl ow and quiet operation
• Built-in internal by-pass lowers water pulsation
• Self primes to 2.1 metres (7 feet)
• Can be installed vertically or horizontally
• Can be run dry for short periods without damage
• Powerful heavy duty ignition protected motor with thermal protection TCO
• Vibration dampening base plate & feet for quiet effi cient operation
• LARGE 23mm port size plug-in hose ports - 2 x 20mm barbed included
• Available in 12 volt & 24 volt in both 40PSI & 60PSI versions

Specifications

• Output up to 22,7 litres / minute (6 GPM) at open flow
• Pressure switch cuts in at ca. 1,4 bar (20 psi) and cuts out at 2,8 bar (40 psi)
• 5-chamber Santoprene diaphragm and EPDM valves
• Typically used for potable water systems with 4 or more outlets
• Self-Priming up to 2,1m
• Runs dry without damage
• Equipped with a bypass which enables smoother flow and decreases cycling
• Including straight snap-in ports 2 x 19mm (3/4") hose barb as well as 1 x 40 MESH strainer
• Amperage max. 15A; fuse size 25A
• Dimensions: Height 11,9 cm / width 12,9 cm (exlcuding hose ports) / length 26,0 cm
• Alternative to Jabsco 82600-0292, P601J-215S-3A